MATSONIC MS7127C Manual do Utilizador descarregar pdf (Página 22)

JP6: CPU frequency select jumper

This jumper enables you to force the CPU to clock at a higher

frequency than it is rated. Short pins 2 and 3 to force the CPU to

run at a 100 MHz FSB instead of a 66 MHz FSB. We recom-

mend that you leave the jumper on the normal operation setting.

Function Jumper Setting

Auto Short pins 1-2

Force 66 MHz FSB to

run at 100 MHz FSB.

Short pins 2-3

JP6

1 2 3

JP7: CPU frequency select jumper

This jumper enables you to force the CPU to clock at a higher

frequency than it is rated. Short pins 2 and 3 to force the CPU to

run at a 133 MHz FSB instead of a 100 MHz FSB. We recom-

mend that you leave the jumper on the normal operation setting.

Function Jumper Setting

Auto Short pins 1-2

Force 100 MHz FSB to

run at 133 MHz FSB

Short pins 2-3

JP7

1 2 3

Note: The CPU speed is determined by the CPU Host/PCI Clock

speed multiplied by the CPU Clock Ratio. Refer to the Frequency

Control Option in Chapter 3 for more information.

Forcing the CPU to run at a higher clock speed then it was rated

for is called overclocking and is not recommended.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 76 77

Sem comentários

MATSONIC MS7127C Manual do Utilizador Página 22